Luminaire and display parts
Transparent covers, display components and light-guide parts evaluated against target geometry.
Injection molding applications
PMMA grades for general and high-flow injection molding.
V2 and V6 share the same optical values at 3 mm. V2 provides the highest Vicat and HDT values in the current V Series. V6 provides substantially higher flow for thinner walls and longer flow paths.
Applications
Common applications for V2 and V6.
Key selection factors include part thickness, gate design, flow length, mold design and operating temperature.
Thin-wall and long-flow parts
Parts where cavity filling and longer or more demanding flow paths guide the grade choice.
Cosmetic packaging
Clear molded packaging components reviewed for flow, appearance and end-use requirements.
V2 or V6?
Compare heat resistance and melt flow.
V2 offers higher heat resistance, while V6 provides higher melt flow for thinner walls and longer flow paths.
| Grade | Primary profile | MFR 230°C / 3.8 kg | Vicat | HDT | Applications |
|---|---|---|---|---|---|
| V2 | General-purpose injection Higher heat profile | 2.0 g/10 min | 107°C | 101°C | Luminaire covers, display and transparent technical parts |
| V6 | High-flow injection Thin-wall and long-flow | 14.0 g/10 min | 89°C | 84°C | Thin-wall parts, longer flow paths, packaging and display components |
Both grades: luminous transmittance ≥93% and haze 0.3% at 3 mm.
Inquiry checklist
Details for grade recommendation.
Send the current resin, part size, wall thickness, flow length, mold information, trial quantity and destination country or port.
01Current resin
Supplier, grade and known material data.
02Part geometry
Dimensions, wall thickness, gate and approximate flow length.
03End use
Lighting, display, packaging or another transparent technical part.
04Commercial scope
Trial quantity, annual volume and destination.
Discuss V2 or V6 for your part.
Share the mold and part information to request the relevant TDS and sample discussion.