Optical
- Luminous transmittance · 3 mm
- ≥93%
- Haze · 3 mm
- 0.3%
- Refractive index
- 1.49
High-flow injection grade PMMA
V6
High-flow injection-grade PMMA for thin-wall and long-flow parts.
V6 is the high-flow V Series profile with an MFR of 14.0, intended for applications where cavity filling and longer flow paths are central to the injection-molding review.
V6 property profile
Optical, rheological, thermal and mechanical properties.
Test standards are not shown on this page. Request the current V6 TDS for the applicable document version and complete technical context.
Rheological
- MFR · 230°C / 3.8 kg
- 14.0 g/10 min
Thermal
- Vicat softening temperature
- 89°C
- Heat deflection temperature
- 84°C
Mechanical
- Tensile strength
- 66 MPa
- Notched Izod impact strength
- 1.3 kJ/m²
- Unnotched Izod impact strength
- 18 kJ/m²
Applications
Applications for high-flow injection PMMA.
V6 provides higher flow for thin-wall components and parts with longer or more demanding flow paths.
Thin-wall components
Parts with reduced wall thickness and higher melt-flow requirements.
Display light guides
Transparent molded display components with longer or more demanding flow paths.
Cosmetic packaging
Clear molded packaging parts reviewed for flow, appearance and end-use requirements.
V2 or V6?
Select by heat resistance and melt flow.
Use V6 when filling behavior is the main challenge. Use V2 as the first comparison when a higher Vicat value is required.
Need help evaluating V6?
Send your current resin, part size, wall thickness, flow length and destination.