Optical
- Luminous transmittance · 3 mm
- ≥93%
- Haze · 3 mm
- 0.3%
- Refractive index
- 1.49
General-purpose injection PMMA
V2
Injection-grade PMMA with higher heat resistance.
V2 is the general-purpose injection grade for transparent lighting, display and technical components. It combines an MFR of 2.0 with the highest Vicat and HDT values in the current three-grade range.
V2 property profile
Optical, rheological, thermal and mechanical properties.
Test standards are not shown on this page. Request the current V2 TDS for the applicable document version and complete technical context.
Rheological
- MFR · 230°C / 3.8 kg
- 2.0 g/10 min
Thermal
- Vicat softening temperature
- 107°C
- Heat deflection temperature
- 101°C
Mechanical
- Tensile strength
- 77 MPa
- Notched Izod impact strength
- 1.4 kJ/m²
- Unnotched Izod impact strength
- 20 kJ/m²
Applications
Applications for general-purpose injection PMMA.
Key selection factors include part thickness, gate design, flow length and operating temperature.
Luminaire covers
Transparent lighting covers and technical lighting parts evaluated under the target geometry.
Display components
Clear molded parts for displays, signage and visual-merchandising systems.
Technical parts
Transparent components where heat profile, flow and finished appearance are reviewed together.
V2 or V6?
Select by heat resistance and melt flow.
V2 has the higher Vicat value. V6 provides much higher melt flow for easier filling. Confirm the decision with mold geometry and end-use temperature.
Need help evaluating V2?
Send your current resin, part size, wall thickness, mold information and destination.